Tag Archives: steel pipe

Journal of 9/16/2015

Assembly of the door frame parts Two side panels for reinforcement Three top plates M8 or M9 U-bolt x14 Six lumbers connect the three top plates. M8 bolt x8

Posted in DIY | Tagged , , , , | Leave a comment

RepRapPro Fisher – 5

I picked up steel and aluminium parts from the laser cut company today. Aluminium parts looked rough on edges. I spent about three hours to disassemble the Fisher and check the frame parts alignment and bolt holes. It was near … Continue reading

Posted in Reprap 3D Printer | Tagged , , , | Leave a comment

2 ton press station for steel pipe

Reference photos for the upgrade.

Image | Posted on by | Tagged , , , | Leave a comment

Journal of 2014/07/28

I felt so good today afternoon after finishing the real size dome made out of steel pipes. I’ll analyze this dome and find solutions – water proof, shape of main door and windows, ventilation, and etc – for the house … Continue reading

Image | Posted on by | Tagged , , , | Leave a comment

Journal of 2014/7/18

Drilling holes on 210 struts is done. A: 90 B: 70 C: 30 D: 10 E: 10 Procedure of drilling two 9.6 mm holes on the strut – apply two punches each end of the pipe – drill two holes … Continue reading

Posted in DIY | Tagged , , , , , , | Leave a comment

Journal of 2014/7/01

2014/07/03 2014/07/01 Type E and D struts are done. I managed to press twenty struts afternoon today. Average time of pressing a pipe’s mouth was six minutes which was little slower than I thought. I had to fix minor issues … Continue reading

Posted in DIY | Tagged , , , , | Leave a comment

Journal of 2014/06/19

The two days of work started at 5:30 AM on Wednesday, finished at 8:00 AM on Thursday June 19th, 2014. I rented a hydraulic press called ‘Brick Cutter’ from a tool rental / repair shop on Wednesday morning for 30,000.00 … Continue reading

Posted in DIY | Tagged , , , , | Leave a comment