Tag Archives: Slic3r

Extreme tests of Steel Fisher

I’m preparining a 3D Farm business. So I’ve been printing difficult models that takes many hours with delicacy. 0.1 mm layer height, 33 hours, KISSlicer 0.1 mm layer height, 17 hours, KISSlicer Lea http://www.thingiverse.com/thing:620461 13 hours, KISSlicer 12 hours 49 … Continue reading

Posted in Reprap 3D Printer | Tagged , , , , , , , , | Leave a comment

Two Voronoi cats

(10/28/2016) I used Meshmixer to add manual support. The Voronoi cat model took two hours and thirty minutes. Slic3r 1.2.9 to generate a gcode file without support. Filament: eSun PLA+ 1.75 mm Temperaure: 185 C Printing speed: 25 mm/s (Perimeters) … Continue reading

Posted in Reprap 3D Printer | Tagged , , , , , , , | Leave a comment

Mastering bridge

I performed E steps fine tuning. The original E steps was 462.80. Final E steps became E443.09 going through eight to ten calibration objects. Infill 95%, Solid layer Solid layer, Infill 95% E Steps Fine Tuning Now, with everything very … Continue reading

Posted in Reprap 3D Printer | Tagged , , , , , | Leave a comment

Slic3r vs Cura – honeycomb pattern

I use Slic3r v1.1.7 to generate a Gcode file for 3D printing. I spent last Sunday to get rid of the hairy strings on printed object like this. I thought adjustment of retraction values in Slic3r would solve it – … Continue reading

Posted in Reprap 3D Printer | Tagged , , , , , , | Leave a comment

Bulbul Junior 3D Printer operation log – Day 4

http://www.thingiverse.com/thing:329076/#files Temperature calibration for 1.75mm PLA filament http://www.thingiverse.com/thing:337957 RepRap Neo – How to set the perfect extruder temperature on your 3D Printer Slic3r setting for good quality: 0.2 mm layer height 0.35 mm nozzle 0.4 mm extrusion width 1.75 mm … Continue reading

Posted in DIY, Reprap 3D Printer | Tagged , , , , , , , , , | Leave a comment