Tag Archives: Print bed

First layer of the printing object is so critical.

Posted on April 7, 2015 by janpenguin

I play in the ten micron (0.01 mm) world. I’m so close to finalize Bulbul Junior 3D Printer but apparently there is one issue I have to solve, which is the Z height changes after few printing session. I suspected … Continue reading →

Posted in Reprap 3D Printer | Tagged , , , , , , , , | Leave a comment

Print bed level calibration of Mini Kossel using M666

Posted on March 27, 2015 by janpenguin

A is center of the print bed. B is tower X, C is tower Y, D is tower Z. Manual calibration of print level makes the nozzle moving across one plane. The calibration step is followed by. Step 1: Set Z … Continue reading →

Posted in Reprap 3D Printer | Tagged , , , , , , , | Leave a comment

Python code to produce print surface from the level probe data

Posted on March 18, 2015 by janpenguin

probe_0315.dat 20.00, 60.00, -0.630 0.00, 60.00, -0.690 -20.00, 60.00, -0.830 -40.00, 40.00, -0.290 -20.00, 40.00, -0.440 0.00, 40.00, -0.600 20.00, 40.00, -0.730 40.00, 40.00, -0.820 60.00, 20.00, 0.160 40.00, 20.00, -0.050 20.00, 20.00, -0.260 0.00, 20.00, -0.460 -20.00, 20.00, -0.620 … Continue reading →

Posted in Reprap 3D Printer | Tagged , , , , , , | Leave a comment

Building of Mini Kossel 3D Printer – 21

Posted on February 10, 2015 by janpenguin

Building of Mini Kossel 3D Printer – 20 I reused foam and paper print bed I made previously. The operator of metal cutting saw at the metal company did favor for me cutting hexagon plate which supposedly identical to the … Continue reading →

Posted in DIY, Reprap 3D Printer | Tagged , , , , | Leave a comment