Tag Archives: house project

3D Printing a dome house

I’ve ported most of Geodome codes in Python 3.4.   I’ll release the program under GPLv3 license soon.  The program  requires Python 3.x and OpenSCAD.   Assembly diagram of domes

Posted in GNU/Linux, Python, Science and technologies | Tagged , , , , | Leave a comment

Building the second dome

I decided to build another dome that shields the dome from water. The dome model’s radius is around 50 cm. Geodome I got to use 3D Printer and OpenSCAD this time. I consider 3D Printer as a powerful engineering tool … Continue reading

Posted in Reprap 3D Printer, Science and technologies | Tagged , , , , , | Leave a comment

Bulbul Junior 3D Printer – Adalinda: The Singing Serpent

http://www.thingiverse.com/thing:246198 Filament: eSun PLA 1.75 mm Layer height: 0.2 mm First layer temperature: 210C Temperature of other layers: 200C Marlin firmware setting echo: Last Updated: Mar 22 2016 03:35:52 | Author: (RichCattell v1.0, Bulbul Junior v0.99, No LCD) Compiled: Mar … Continue reading

Posted in Reprap 3D Printer | Tagged , , , , | Leave a comment

Journal of 10/22/2015

Finally I’ve finished coating of lime plaster today on the dome. I dedicated past few weeks for the house project at least to finish water proof of the dome before winter starts. Bill of Material Earth, 8.5 ton, W0 (free … Continue reading

Posted in DIY | Tagged , , , , , | Leave a comment

Journal of 10/14/2015

Early morning is cold near zero degree. I’m wearing a vest, cotton gloves, two long sleeves, long underwear pants. Ready to tackle the roof top Laying two rows of earthbag on the roof Regular visitor dropped by. The old lady … Continue reading

Posted in DIY, Permaculture | Tagged , , , | Leave a comment

Journal of 9/16/2015

Assembly of the door frame parts Two side panels for reinforcement Three top plates M8 or M9 U-bolt x14 Six lumbers connect the three top plates. M8 bolt x8

Posted in DIY | Tagged , , , , | Leave a comment

Journal of 7/26/2015

Posted in DIY, Permaculture | Tagged , , , | Leave a comment