Checking the level of six vertices that forms one flat plane.
Making three cross bars that support two wooden plates.
Drilling nine bolt holes that attach three cross bars and two plates on top of the workbench.
Checking alignment of the nine bolt holes and length of the bolt.
M6x60 bolt was too short. I decided to use M6x80 bolt for final assembly of the parts.
Drilling nine bolt holes on the second plate.
Applying soybean oil on the parts to prevent moisture absorption
Making a metal brush for fiberglass coat
The mixture ratio between fiberglass resin and hardener was one hundred to one gram.
I bought a small scale that measures weight by one tenth of gram unit. I mixed 100g of fiberglass resin and 1g of hardener.
Pouring 100g of the resin into a cup
Putting 1g of hardener into the cup
Mixing the resin and hardener in a paper cup
I applied three layers of fiberglass coats on the second plate.
Let the fiberglass cured for hours.
Snap shots
I patched two mouse holes on the floor and relocated the tent fifteen to twenty centimeter against the wall. I probably spent three valuable hours to the job.
